How to choose a 65W GaN charger for your brand
Seven things that decide whether a 65W charger sells well in your market — and five questions to ask any supplier before you commit to a tooling or certification budget.
Start with the port, not the wattage
Two chargers both advertised as 65W can behave completely differently. The number that matters is what the port holds under load, on a unit taken from the production line — not the figure in the chipset datasheet. Ask a supplier for the measured output of a shipping sample, and you will separate the factories that test from the ones that copy a spec sheet.
1. Protocol: PD 3.0, PPS and why PPS matters
USB-C Power Delivery sets the voltage ladder (5V, 9V, 12V, 15V, 20V). PPS (Programmable Power Supply) adds the fine-grained range that Samsung and many Android flagships use for their fastest charge. A charger that advertises 65W but has no PPS will charge those phones at a slower fixed step — the customer will notice, and the review will say so.
For anything sold from 2026 onwards, ask for: PD 3.0 with PPS. AVS is worth having only if you are targeting the newest laptops; it is not a selling point a phone buyer will recognise.
2. Port configuration decides the shelf position
- 1C1A (USB-C + USB-A) — the volume seller. Fits every market, replaces the old charger plus the old cable, and the USB-A port keeps legacy accessories alive.
- 2C — the upgrade pitch: charge a laptop and a phone together. Higher price, smaller audience, better margin.
- 3C1A and above — a different product category: the desktop hub. Sells on power, not on size.
3. One mould, four markets
Plug type is where projects quietly get expensive. A charger built around an interchangeable-plug mould lets you serve the US, EU, UK and China from the same tooling, changing only the clip. If a supplier quotes you a separate mould per market, you are paying twice for the same housing.
4. Derating: the honest conversation about output
A 65W claim has two versions: the certified maximum the design was submitted at, and the continuous output the production units actually hold. Both can be true at the same time — but only one of them is what your customer measures. Ask for the derating curve: at what ambient temperature does the charger pull back, and to what. A supplier who can answer this in writing is a supplier who tested it.
5. Certification: who holds it, who pays for it
In this category the CE, FCC or UL certificate is normally issued to the brand owner, because it is tied to your brand, your model number and your configuration. That means the useful questions are not "what certificates do you have" but:
- What is the technical file you provide for my submission — schematic, PCB layout, BOM, ratings label?
- Do you supply samples from the production line, not laboratory-built units?
- Do you stay on the project through EMC or safety rework?
- Who pays the laboratory and certificate fees, and is that quoted separately or hidden in the unit price?
A supplier who answers "certificates? we hold all of them" for a private-label product has not understood the question — in this category the certificate is issued for your brand and model, so nobody can hold it in advance. See how we answer it on our certifications page.
6. MOQ, tooling and packaging economics
The unit price is only part of the landed cost. For a first order, the three numbers that matter are: minimum order quantity per model, one-time plate or tooling charge for private-label packaging, and whether mixed models within a category can be combined. A supplier who can combine models lets you test four colours instead of committing to one.
7. The buyer's checklist
| Protocol | PD 3.0 + PPS (AVS only if laptops are the target) |
|---|---|
| Ports | 1C1A for volume; 2C for the upgrade pitch |
| Measured output | Shipping-unit figures, not datasheet figures |
| Derating | Output at 25°C and at 40°C, in writing |
| Plugs | One mould covering US / EU / UK / CN |
| Certification | Technical file + line samples + rework support; certificate in your name |
| MOQ | Per model, and whether categories can be mixed |
| Packaging | Unit price with and without private-label box |
What to do next
Send the supplier a target date, a target quantity and the market you are selling into. The reply will tell you more than any catalogue: a factory answers with lead times, testing and certification questions; a trader answers with a price.
If you are specifying a 65W charger now, we build one: the S305-AC, PD 65W 1C1A with PPS, one mould for US / EU / UK / CN plugs, private label from 1,000 pcs for a first order. Tell us the market and the quantity and we will come back with the spec sheet, a sample plan and the certification route.
Next in this series: what certification a PD charger actually needs for the US, EU and UK — what is mandatory, what your retailer demands anyway, and who the certificate is issued to.
Send us your specification
Tell us the market, the quantity and the brand you are building — we will come back with the spec sheet, a sample plan and the certification route.
